We have come across this article relating to What Would Cause My Electric Water Heater to Stop Working? down the page on the net and decided it made sense to share it with you on this page.
Numerous contemporary houses use an electric hot water heater for their heater, as a result of its comfort as well as simplicity of use. Nevertheless, similar to any other electrical appliances, problems might emerge with its use, suddenly. It can be really frustrating to awaken to a cold shower as opposed to a warm one or having your bath with water that isn't hot adequate and even too warm. Whatever the situation may be, water heater problems can be fairly nerve-racking. Fortunately, we have actually made a list of possible remedies to your water heater concerns. There are a variety of factors that could cause much of these problems, maybe a problem with the power supply, the electric burner, or the thermostat. Prior to doing anything, ensure you turn off the primary power supply for safety. Whatever the trouble is, getting it taken care of should not posture excessive of an issue if you comply with these steps:
Examine Your Power Supply:
As basic as this might appear, it is extremely necessary. Without ample power, your hot water heater will certainly not operate. So the first thing to do when your water instantly stops working is to validate that it isn't a power issue. Examine if the fuse is blown out or the breaker tripped. If the circuit breaker is the problem, merely turn it on and off again. Replace any kind of broken or damaged fuse. Test the home appliance with power after these changes to see if it's now functioning.
Check the Burner in the Hot Water Heater:
If it's not a power problem, then attempt taking a look at your heating element if it is still functioning. Examine each of your heating elements to make sure the trouble isn't with any of them. If any one of them is damaged, change that part and then inspect whether the warm water is back on.
Check Your Thermostat:
If your water heater still isn't functioning or the water appearing isn't warm enough, you may need to examine the temperature level settings on your upper thermostat. Make sure the breaker is switched off before doing anything. Open the gain access to panel as well as press the red switch for temperature level reset above the thermostat. This ought to assist warm the water. Turn the circuit breaker back on as well as examine if the issue has actually been dealt with.
Call An Expert:
If after changing all faulty parts as well as resetting your temperature level, the water heater still isn't working, you might need to speak to a professional plumber for a specialist opinion. The problem with your heating unit could be that the hot and cold taps have been changed or it might be undersized for the amount of hot water required in your house. Whatever the instance might be, a professional plumber would assist resolve the trouble.
Conclusion
Water heater issues are not constantly major. A number of them are due to minor concerns like a blown fuse or damaged heating element. Changing the defective components should work. However, if you are still not able to address the trouble, give a call to your local plumber to come to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
As a devoted reader on How to Troubleshoot and Repair an Electric Water Heater, I imagined sharing that blog post was essential. Sharing is nice. You just don't know, you may just be doing someone a favor. I love reading our article about How to Troubleshoot and Repair an Electric Water Heater.
Leak detection needed?